How to tell a mining camp from a logging camp on satellite imagery

A calm river bend reflecting trees and sky, bordered by dense green forest.

A fresh clearing on your monthly pull doesn't tell you what's happening on it. Before you commit a field team or a chopper, you need to know if you're looking at a mining camp, a logging crew's staging area, or just a farmer extending a garden plot. The three can look alike at a glance, especially at 10-30 m resolution where everything is just a pale patch in green. At sub-2 m, the tells separate out.

Clearing shape and what's stacked on it

Logging clearings tend to follow the timber, not the terrain. You'll see long, narrow strips running along a skid trail or a ridge line, widening at a landing where logs get decked before trucking out. The giveaway is the stack itself: parallel rows of cut trunks, usually pale gray-brown and consistent in length, laid out like pencils in a box. A log landing photographs as straight lines on bare earth, and the access road into it is wide enough for a loader, often with visible turning bays cut into the verge.

A mining camp clears in a blob, not a strip. Artisanal and small-scale operations tend to open ground around the pit or the sluice run first, then add structures as the crew grows, so the clearing reads as an irregular polygon rather than a corridor. Look for a tight cluster of small roofs, tin or tarp, usually under 6 x 4 m each, arranged close together rather than along a line. There's rarely a single wide haul road; instead you get a web of footpaths and narrow motorbike tracks converging on the pit from several directions.

Timber stacks also catch light differently than roofing. Cut logs show up with a visible grain pattern and rounded ends in a fine-resolution pull. Hut roofs, even cheap tarp ones, give you a flat, even reflectance and a hard rectangular edge. If you're trying to separate a clearing with huts from a clearing with timber stacks on the same image, zoom to the object edges before you trust the overall footprint shape.

Water color is the fastest tiebreaker

This is the one that saves the most time. Logging doesn't produce standing water features unless there's a stream crossing or a borrow pit for road fill, and even then the water usually stays clear or just carries suspended sediment after rain. A mining operation, especially anything involving a sluice or a wash plant, almost always leaves a pond or settling pit nearby, and that water runs turbid: pale brown, tan, or milky depending on the ore body, and it holds that color for weeks because the fines don't settle out fast. If you see a small rectangular or kidney-shaped pond with discolored water sitting fifty to a few hundred meters from a cluster of huts, that's a mining signature logging almost never produces on its own.

Worker camp identification gets easier once you're cross-checking these three things together: clearing shape, structure layout, and water. A logging operation gives you strips, stacks, and clear water. A mining operation gives you blobs, huts, and turbid ponds. A farm clearing gives you neither; it's usually a tidy rectangle with planted rows visible once the canopy's fully gone, and no pond at all unless there's irrigation.

None of this replaces eyes on the ground when it matters. What it does is cut down which of your new clearings are worth sending a crew to in the first place. If your district throws up fifteen bare patches on a given month's pass and only three of them show the hut cluster plus turbid pond pattern, you've just saved twelve field days.

That's the gap Illegal Mine Map is built to close: a monthly scan of your concession or district that flags new bare-earth clearings and turbid ponds consistent with unlicensed workings, so the field check goes to a coordinate, not a guess.

If you're staring at a new clearing on this month's imagery and can't decide what it is, that's worth a second look before you write it off as a logging site.

Start a pilot

← Back to the blog