Artisanal vs mechanized mining: reading the difference in satellite imagery

A dirt path winding through dense, misty forest.

If you manage a concession or patrol a mining district, you've probably squinted at a satellite image trying to figure out whether a new clearing is somebody with a shovel and a sluice box or a crew that trucked in an excavator. One is a few people working a shallow pit by hand, gone in a season. The other can strip a hillside in weeks and keep going. Telling them apart before you send a field team decides whether you send one person on a motorbike or a truck with backup.

What artisanal workings look like from above

Pick-and-shovel sites tend to be small and irregular. You'll see clustered pits rather than one continuous cut, because diggers are following a seam or a gravel bar by hand instead of benching out a whole face. The bare-earth footprint is often under a hectare, sometimes just a scatter of pits a few meters across each. Access is usually a footpath or motorbike track, not a graded road, so you won't see the wide, compacted haul routes that heavy equipment needs to get in and out.

Processing is the other tell. Artisanal operations run small sluice boxes or pan in nearby streams, which shows up as localized turbidity, a cloudy plume in a creek or a small settling pond that's turbid one month and gone the next as the crew moves on. The whole site tends to shift position over a few months as workers chase the ore, so you're looking at a loose cluster of small disturbances rather than one site that keeps expanding in place.

What mechanized operations leave behind

Excavator and dredge sites read differently even at the same resolution. The clearing is larger and more regular, often a rectangular or stepped cut with visible benching where machinery has worked in lifts. You'll see a graded access road wide enough for trucks, sometimes with a turning area or a staging pad where equipment or fuel gets parked. Tailings or processing ponds are bigger, more geometric, and stay turbid for longer because the operation is running continuously rather than in bursts.

The growth pattern is the real giveaway over time. A hand-dug site wanders. A mechanized site expands outward from a fixed point, month over month, because the equipment is anchored to haul roads and a processing setup that's expensive to relocate. If you're watching the same coordinates grow a little wider every pass, that's usually heavy equipment, not hand tools.

Reading the clearing before you decide who to send

None of this tells you who has a permit and who doesn't. A licensed small-scale miner working by hand looks the same from orbit as an unlicensed one. What the imagery gives you is a way to sort the queue: a pick-and-shovel operation that's small and isolated can wait for a routine pass, while a mechanized clearing that's doubled in size since last month, with a new access road and a fresh turbid pond, is the one that gets a field check this week. By the time heavy equipment is visibly large on a satellite pass, it's already moved a lot of ground.

The resolution you need to make this call reliably sits in the 0.5 to 2 meter range. At coarser resolution, a cluster of small artisanal pits can blur into one blob and look bigger than it is. At that finer resolution, you can actually count pits, trace a haul road, and see whether a pond edge is geometric or just a puddle in a depression. RGB imagery is enough for this, since turbidity and bare earth both show up clearly without needing specialized bands.

Checking imagery pit by pit across a whole concession every time a tip comes in stops working once you're past a handful of sites. That's the gap a monthly flagged-site layer is built to close, matching new bare-earth clearings and turbid ponds against what was there last month so you can see which ones are spreading before you decide where to send a truck. If you're sorting pick from excavator across a district you can't walk every week, that's worth a look.

Start a pilot

← Back to the blog