What a dredge raft is, and why it shows up before the processing pond does

A rocky river channel with a wide gravel bar running through a misty forest.

What a dredge raft actually is

A dredge raft is a floating rig, usually a few pontoons or lashed-together oil drums with a suction pump, a hose, and a sluice box bolted on top. Sometimes there's a small generator sitting on a plank deck, sometimes just a hand-pulled line to keep the thing from drifting downstream. Crews pole or motor it out to a bar or channel bend, drop the suction hose to the riverbed, and pump gravel and sediment straight up onto the sluice. Whatever's heavy enough, gold flakes, cassiterite, garnet sand, catches on the riffles. Everything else goes back over the side.

It's cheap gear, built to be assembled on-site and abandoned fast if a patrol shows up. That's part of why it's so often the first physical evidence of a new working, well before anything you'd call infrastructure exists.

Why the raft comes first and the pond comes later

Early on, an operation doesn't need a pond. The raft pumps straight off the riverbed and the tailings go straight back into the current, so the only signature is a plume trailing downstream, pale and diffuse, widening with the river's flow. No excavation, no berm, nothing dug into the bank.

A settling pond only gets built once the operation decides it's staying. That usually means the crew has shifted from working the river channel itself to processing material dredged or trucked from the bank, where you need a holding area to let the fines drop out before the water goes anywhere. Digging that pond means clearing bare earth, which is a much bigger, much slower change on the ground than a raft tied up against a snag.

So the sequence on the ground, and on imagery, tends to run the same way almost everywhere: raft and plume first, bank clearing next, pond once the site has committed to staying put for a season or more. Catching the raft stage means catching the operation before it's dug anything permanent.

What a dredge raft looks like on satellite imagery

On high-resolution imagery, a working raft reads as a small, pale, geometric shape sitting on otherwise uniform water. It's usually moored close to a bank, often at a bend or a gravel bar where the current slows enough to work it safely. Look for:

  • A rectangular or irregular light-toned object on the water surface, distinct from natural floating debris by its straight edges
  • A turbidity plume trailing downstream, pale and diffuse against the river's normal color
  • A short cleared track or trampled path down the bank where the hose or crew crosses from land to water
  • A second, smaller raft or canoe nearby, since most crews run a support boat alongside the pump raft

None of this is guaranteed to show up clean on a single pass. A raft is small against a river channel, cloud shadow and glare off water hide plenty, and a well-run crew moves the rig between scenes. That's exactly why one month's imagery alone won't tell the story. It's the comparison between two passes, same stretch of river, few weeks apart, that turns a vague pale smudge into a plume that wasn't there last time.

Reading river mining equipment signatures against legitimate activity

Not every raft or plume on a concession river is unlicensed. Legal alluvial permits and sanctioned sand extraction use the same basic kit. The difference on imagery comes down to where the raft sits relative to the boundary you hold a license for, and whether the plume is new. A raft that's been in the same spot for a year inside a licensed block is business as usual. A fresh plume appearing on a bend outside any permitted working, especially one that wasn't there the month before, is worth a field visit.

That's the comparison Illegal Mine Map is built to run month over month, flagging new clearings and turbid water against your concession boundary so a field team knows which bend to check before anyone's dug a pond. Take a look at how the monthly scan works for your concession.

Start a pilot

← Back to the blog